Chengdu Haoli Electronic Technology Co.,Ltd.
Chengdu Haoli Electronic Technology Co.,Ltd.
Add to Cart
M12 300KHZ Ultrasonic Proximity Switches Industrial Control Sensor
Description
Ultrasonic proximity switch work only with the aid of air medium, can detect any physical body can be reflected ultrasonic sensor ultrasonic pulse cycle launch these pulses are reflected by the object, the reflected wave is formed by receiving translates into an electrical signal of incident echo detection is based on its strength, while the echo intensity depends on the object and the distance between the ultrasonic proximity switch ultrasonic proximity switch according to the principle of reflected wave propagation into the line of work, namely the launch of the pulse and the pulse reflection wave assessment of the time difference between the sensor structure can make the ultra sonic beam in the form of conical emission only the reflected object located in the cone can be detected in the blind area between the sensor surface and the induction range, and the reflected wave cannot be evaluated due to physical reasons.
feature
Application
Fill level measurement
Dimensional measurement material stack height measurement
Diameter and speed measurement
Loop monitoring quality inspection
Distance monitoring material, level measurement
Specification
| Diameter | M12 |
| Tech-in-range(mm) | 30-400 |
| Resolution(mm) | 0.1 |
| Frequency(KHZ) | 300±5 |
| Operating Voltage | 10VDC |
| Ripple | <10% |
| No Load Current(mA) | <50 |
| Max.Load Current(mA) | 150 |
| Leakage Current | <0.1mA |
| Voltage Drop | <3V |
| Response Delay | 108ms |
| Output | PNP,NPN |
| Protection Category | IP67 |
| Operating Temperature | -25°C - +70°C |
| Temperature Drift | <1.5%(Sr) |
| Short Circuit Protection | YES |
| Overload Trip Point | 180mA |
| Determination | 63 * Ø18 mm |
